Справочник Пользователя для Acer Altos G710

117

To set a Supervisor/User password

1

Use the up/down keys to highlight a password parameter 
(Supervisor Password or User Password) then press Enter. 

A password box will appear.

2

Type a password then press Enter. 

The password may consist of up to six alphanumeric characters 
(A-Z, a-z, 0-9).  

3

Retype the password to verify the first entry then press Enter 
again. 

After setting the password, the system automatically sets the 
chosen password parameter to Installed. 

To change the Supervisor/User password

1

Use the up/down keys to highlight either change password 
parameters (Change Supervisor Password or Change User 
Password) then press Enter. 

2

Type the original password then press Enter. 

3

Type a new password then press Enter. 

Change 
Supervisor 
Password

Press Enter to change the Supervisor 
password.

Password 
Check

When this item is set to Setup, the 
system will ask for the password every 
time you run the BIOS Setup utility. 

When set to Always, the system will 
awalys ask for the password every 
time it boots. 

Keyboard Lock 
Mode

Enable or disables the keyboard lock 
mode. 

Enabled

Secure Mode 
Hot Key

Select a key to be used to serve as hot 
key in activating Secure Mode. 

F11