Справочник Пользователя для Emerson SERIES 600T

Your Liebert FS is equipped with a UPS interconnection kit to connect it to one of these Liebert UPS 

systems:

• Liebert Series 610™, 600T™ or 600™
• Liebert Npower™
• Liebert Series 300™
• Liebert HiPulse™

The Liebert FS system must be installed according to the instructions in 4.0 - Installation. Integrate 

your Liebert FS system into an Uninterruptible Power Supply (UPS) system in accordance with the 

instructions and drawings in this manual.

The electrical connections to the Liebert FS are:

• DC  power
• Status/control
• Ground
• Auxiliary backup power
• Remote monitoring (optional)

The initial system startup must be performed ONLY under the supervision of a 

Liebert-certified service technician to ensure proper system operation. Failure to abide by 

instructions provided herein may void your warranty.
Contact your local Liebert sales representative or Liebert Global Services at 1-800-LIEBERT 

to arrange for system startup.

NOTE
Before beginning installation, ensure that your Liebert FS unit is equipped with the correct 

25FS

Liebert Series 300

37FS

Liebert Npower

39FS

Liebert Series 610/600T/600

Contact Liebert

Liebert HiPulse (50Hz European Model)

A qualified electrical contractor must perform all electrical connections. The wires (DC power, 

ground, optional status/control and auxiliary backup power) that connect the Liebert FS 

system(s) to the UPS system are field-supplied or, as an option, by Liebert. Wire size and 

installation must comply with all applicable local, regional and national regulations (e.g., 

National Electric Code for USA).

NOTE
The connection instructions included in this section address ONLY the cabling of the DC power