Справочник Пользователя для Cisco Systems 124778
3-8
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 3 Component Replacement
3.2.4 Replace a Rectifier
Figure 3-8
Removing a Circuit Breaker
Step 5
Remove the alarm cable connections from the rear of the breaker (
).
Step 6
Pull the breaker straight out from the 1RU Distribution Shelf.
Step 7
To reinstall a replacement 1RU Distribution Shelf see the
3.2.4 Replace a Rectifier
Note
For more information on uninstalling a rectifier, see the
.
Step 1
Locate the rectifier that is to be removed.
Step 2
Loosen the mounting screws to allow the rectifier handle to open (
#1).
Step 3
Grasp the top of the handle and pull down until the handle locks into the open position (
#2).
124757