Справочник Пользователя для AEG 1000 (S)
36
6.
LED Line (Mains status): The green LED lights
up if mains voltage is in a specified range of
tolerance. The LED Line flashes when the phase
and neutral conductor have been reversed at the
input of the UPS system. In this case turn the
mains connector 180° in the shockproof socket.
up if mains voltage is in a specified range of
tolerance. The LED Line flashes when the phase
and neutral conductor have been reversed at the
input of the UPS system. In this case turn the
mains connector 180° in the shockproof socket.
7. -11. LED Bargraph for UPS battery utilization resp.
capacity (remaining autonomy time)
These LEDs show the load of the UPS system if
the mains power is available (normal operation):
the mains power is available (normal operation):
11. orange LED
96% – 105%
10. green LED
76% – 95%
9. green LED
56% – 75%
8. green LED
36% – 55%
7. green LED
0% – 35%
In the battery operation, the LEDs indicate the
capacity of the batteries:
capacity of the batteries:
11. orange LED
0% – 25%
10. green LED
26% – 50%
9. green LED
51% – 75%
8. green LED
76% – 95%
7. green LED
96% – 100%
12.
LED Fault: The red LED lights up and an acoustic
warning signal is issued continuously when the
UPS system is in fault condition.
warning signal is issued continuously when the
UPS system is in fault condition.