Справочник Пользователя для Liebert Series 610

Refer to Figure 5.

The Mimic panel consists of the following:

• UPS SYSTEM 1 - PRIMARY BYPASS
• UPS SYSTEM 2 - PRlMARY BYPASS
• UPS SYSTEM 1 - ON BYPASS
• UPS SYSTEM 2 - ON BYPASS
• LOAD 1 CIRCUIT BREAKER
• LOAD 2 CIRCUIT BREAKER
• TIE CIRCUIT BREAKER

• LOAD  1  -  NORMAL
• LOAD 1 - ON SYSTEM 2
• LOAD 1 - SYSTEMS TIED
• LOAD 1 - OFF

• LOAD  2  -  NORMAL
• LOAD 2 - ON SYSTEM 1
• LOAD 2 - SYSTEMS TIED
• LOAD 2 - OFF

• CONTROL STATUS - SYNCHRONIZING
• CONTROL STATUS - TRANSFERRING

This light turns on when UPS System 1 is the selected Primary Bypass. When lit, the light indicates 

the UPS Modules of both UPS systems are synchronizing to the bypass of UPS System 1, when sys-

tems are tied or in the process of transferring load.

This light turns on when UPS System 2 is the selected Primary Bypass. When lit, the light indicates 

that the UPS Modules of both UPS systems are synchronizing to the bypass of UPS System 2, when 

systems are tied or in the process of transferring load.

This light turns on when UPS System 1 is on Bypass.

This light turns on when UPS System 2 is on bypass.

These two lights indicate the OPEN (Red light) or CLOSED (Green light) state of the Load 1 circuit 

breaker.

These two lights indicate the OPEN (Red light) or CLOSED (Green light) state of the Load 2 circuit 

breaker.