Справочник Пользователя для Liebert 30-130kVA

If your Npower UPS is equipped with a modem and telephone line, you can call the UPS and receive 

system status and historical information. You can place the call from either a remote terminal or a 

personal computer with a communications program. 
Follow the instructions for your terminal or your communications program to call the UPS. (See 

Options Manual for details.) Once connected, the UPS will respond to your specific requests for infor-

mation (See Table 8).
For example, to see a copy of information on the active status reports, enter the command, “SR” and 

press ENTER. The Npower UPS will send the data, which will be displayed on your screen. Please 

note that the data on the screen is like a snapshot -- the status of the UPS at the moment you 

requested the information. The information sent remotely is not updated, although you can repeat the 

process at intervals to request the present information.
Some screens contain data that you may wish to import into a spreadsheet for further calculations. To 

put this data into a usable format, use the screen-capture feature of your communications software 

(or a separate screen-capture program) to save all or part of the data to disk. Hint: If you save the file 

with an extension of “.txt,” it can then be imported into a spreadsheet program and converted to work-

sheet format.
To terminate your connection to the Npower, type “Quit” and press Enter. The UPS will hang up its 

modem and await your next call.

The Dial Out Pager requires the modem option to be installed. (It works with both the external and 

internal modems) Its function is to provide pager support (alphanumeric and numeric)for the Npower 

system.
The Pager Support Screen can be accessed by starting with SYSTEM CONFIGURATION, and navi-

gating to COMM OPTIONS, and then to PAGER SUPPORT CONFIGURATION.

From this screen you can enable or disable the pager, and set it to the pin number required for alpha-

numeric paging on Skytel. 
The PAGER ENABLED field can be set to YES or NO. This is interlocked with the modem option. 

Pager support requires the modem.
The PAGER PHONE NUMBER: can have a maximum of 20 digits. This entry is blank when the 

NVRAM is first initialized.
The PIN NUMBER can have a maximum of 20 digits. The default pin number is 00000000
Note: Changes to these pager parameters aren’t saved into NVRAM until you select “Save & Exit” 

when you leave the configuration menu screens.

PAGER ENABLED                            : YES

PAGER PHONE NUMBER               : 8003433433

PIN NUMBER                                    : 11111111