Справочник Пользователя для Micro Technic PV-5120
Users Manual & Installation Guide
PV-
SERIES
:
Power supply module with UPS and SSD Flash
Page 3 of 8
F
EATURES AND SPECIFICATIONS
Power Supply
•
Output power capability:
30W(max)
•
Input voltage:
8-30 VDC or
16-30 VDC using battery charger for 12V battery
•
Output voltage:
+5V @5A (max)
+12V @250mA(max)
-12V @100mA(max)
•
Line regulation(+5V)
0.3% - @low line to high line; full load
•
Load regulation(+5V)
0.6% - @no load to full load; nominal input
•
Load regulation(+12V)
1% - @no load to full load; nominal input
•
Load regulation(-12V)
0.5% - @no load to full load; nominal input
•
Ripple/noise:
150mV p-p; DC–20MHz
•
LED indicators:
Green LED indicating presence of +5V
Green LED indicating presence of +12V
Green LED indicating presence of -12V
Green LED indicating Mains>16V
Battery charger
•
Supported battery-type:
12V lead-acid, min. 4AH
•
Charging method:
Constant current / constant voltage
•
Charging current:
400mA
•
LED indicators:
Yellow LED indicating “Battery full”
•
Red LED indicating “Battery low”
UPS
•
Alarm outputs:
“Mains failure” alarm interrupt
•
“Battery low” alarm interrupt
•
Interrupt support:
INT 5,7,9,10,11,12,15 – programmable
•
Automatic shut down:
120 sec after detection of both:
•
“Mains failure” and “Battery low”
•
CPU controlled shut down:
Controlled by user-software, delayed up to 127 sec.
SSD
•
Disk capacity:
PV-5122: 1.76 MB
•
PV-5124: 3.84 MB
•
Speed:
PV5122: Read 170 KB/sec, write 20 KB/sec
•
PV5124: Read 90 KB/sec, write 15 KB/sec
Physical / Environment
•
Dimensions:
96x90x18mm
•
Temperature range:
Operating: -20°C to 70°C
•
Storage:
-40°C to +85°C
•
Humidity:
0 to 90% RH, non-condensing
•
Connectors
PC/104 Stack-through connectors
•
Screw terminals for mains and 12V battery