Справочник Пользователя для Mitsubishi Electronics 700 Series
94
Self-diagnostic Function
3.16.1 Error-time operation mode
The built-in PLC function allows you to set whether the sequence program operation
will be stopped or continued at occurrence of an operation error.
Use the built-in PLC function parameter to set whether operation will be stopped or
continued.
will be stopped or continued at occurrence of an operation error.
Use the built-in PLC function parameter to set whether operation will be stopped or
continued.
z
Default value of error-time operation mode
The following table indicates the default value (initial value) of the error-time
operation mode and the status of the built-in PLC function.
The following table indicates the default value (initial value) of the error-time
operation mode and the status of the built-in PLC function.
Table 3.5 Error-time Operation Mode
Error Definition
CPU Status
Operation
P.RUN
LED
Special
relays
turned on
Special
registers
for data
storage
storage
Self-
diagnostic
error No.
(D9008)
Default value
Operation
error
error
An error occurred in
the sequence
program, e.g. an
attempt was made to
make BCD
conversion of any
value outside the
range 0 to 9999 (or 0
to 99999999).
the sequence
program, e.g. an
attempt was made to
make BCD
conversion of any
value outside the
range 0 to 9999 (or 0
to 99999999).
Continuation
Flicker
M9010
M9011
M9011
D9010
D9011
50