Справочник Пользователя для Toshiba 80
7
G8000 Series Installation and Operation Manual
CAUTION
DO NOT transport, move, store, or place the UPS on its side.
Forces due to heavy components inside may damage the UPS.
Forces due to heavy components inside may damage the UPS.
Avoid vibration or shock exceeding 0.5G.
Failing to observe this precaution may cause damage to the UPS.
Failing to observe this precaution may cause damage to the UPS.
DO NOT allow the UPS to suffer shock or impact when
unpacking.
Tools used to remove packaging materials may cause damage to the
Tools used to remove packaging materials may cause damage to the
UPS.
DO NOT push or pull on the sides of the packaging.or the
UPS to move it. Always use a crane, forklift, or pallet jack for
transporting and positioning the UPS.
Pushing/pulling on the sides of the unit to move it may result in damage
Pushing/pulling on the sides of the unit to move it may result in damage
to the UPS. See Figure 4.1 Exterior Handling label.
Fig. 4.1 Exterior Handling label
FORKS
(4 Ft. Minimum length)
WARNING:
Risk of tipping. For safe handling, lift
Risk of tipping. For safe handling, lift
from back and sides only (as shown above)
UPS
Do not push or
pull from sides
pull from sides
BA
CKSIDE
Do not push or
pull from sides
pull from sides
BY CRANE
BY FORKLIFT
See manual for complete details.
:
- Cables should have sufficient rating
and equal length.
- Keep UPS leveled when lifting/lowering
and avoid impacts.
:
- Verify forklift maximum load capacity.
- Ensure that the forks are long enough
to support the UPS and are inserted
properly.
- Do not swing or tilt the UPS when
lifting and/or transporting.