Справочник Пользователя для Panasonic PT-LB10SE
38-E
NGLISH
CONTRAST
This adjusts the contrast of the
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: I button
The picture is dark:
picture. (Adjust the “BRIGHT”
setting first if required before
adjusting the “CONTRAST” setting.)
The picture is bright: I button
The picture is dark:
H button
BRIGHT
This adjusts the darker areas (black
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR
(S-VIDEO/VIDEO/YP
B
P
R
only)
The colour is too deep: I button
The colour is too pale: H button
The colour is too pale: H button
TINT
(NTSC/NTSC 4.43/YP
B
P
R
only)
This adjusts the flesh tones in the
picture.
The flesh tones are greenish:
I button
The flesh tones are reddish:
H button
picture.
The flesh tones are greenish:
I button
The flesh tones are reddish:
H button
SHARPNESS
To soften the picture details:
I button
To sharpen the picture details:
H button
I button
To sharpen the picture details:
H button
COLOR TEMP.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
areas of the picture if they appear
bluish or reddish.
White balance R/G/B
(W-BAL R/G/B)
(W-BAL R/G/B)
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised.
To make the selected colour lighter:
I button
To make the selected colour stronger:
H button
This is used to adjust the white
areas of the picture if they appear
colourised.
To make the selected colour lighter:
I button
To make the selected colour stronger:
H button
AI
ON
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.
The lamp is controlled according to
the input signals to project images
with the best quality.
OFF
“AI” is disabled.
C O L O R T E M P . S T A N D A R D
[
H I G H
[
L O W
NOTE:
B “AI” is disabled when “LAMP
B “AI” is disabled when “LAMP
POWER” is set to “LOW”.
(Refer to page 45.)
(Refer to page 45.)