Справочник Пользователя для Panasonic PT-F100NTU

When projecting an image, press FREEZE to 
capture the projected image and display it on 
the screen as a still picture. Press again to 
escape. While the image is frozen, the sound 
will be stopped.

You can turn off the lamp and stop the 
projection temporary for electrical power save. 

Press the SHUTTER button to return to the projection.

You can reset most of the customized settings 
to the factory defaults by pressing DEFAULT 
button of the Remote control. Display the 
required sub menu or the menu items and 
press the button again.

You can project an image in split 2 windows 
as an INDEX-WINDOW, one is frozen, stored 
in memory and displayed on the screen’s left 
side, while the display of subsequent images 
continues on the right.
To escape from the INDEX-WINDOW, press 
the MENU or RETURN button.

Q

In default, the frozen image is displayed on the left 
and the subsequent image is displayed on the 
right. Press I H to switch the position.

Q

Press F G to switch and cycle through in 3 size.

Q

While in INDEX-WINDOW mode, press ENTER to 
capture a new image and the frozen image window 
will be updated in a while.

• Escaping from the freeze mode is available by pressing 

any button.

• Some menu items are not available to reset by pressing 

the DEFAULT button. Adjust each menu items 
manually.

• To reset all the settings to the factory defaults, see 

• If you change the window size, the aspect ratio of the 

image is changed and becomes vertically elongated.