Справочник Пользователя для Panasonic PT-F100U

If a problem should occur with the projector, the TEMP , LAMP and/or 
FILTER indicators will inform you. Manage the indicated problems as 
follow.

1. Confirm the status of all indicators and projector, and switch off the 

projector in proper way.

2. Find out the cause of the problem by status of the TEMP , LAMP 

and/or FILTER indicators.

3. Follow the instruction for each indication below and solve the 

problem.

4. Turn on the projector in the correct way and confirm the indicator is 

not indicating a problem any longer.

J

J

J

When the ARF indicator is flashing GREEN, the ARF is normally rolling up.

• If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorized Service Center.

 

Illuminating RED

 

Flashing RED

LAMP RUNTIME has 
reached 2 800 hours.

LAMP circuit failure, abnormal function or Lamp unit is damaged.

Lamp unit will run out 
soon and needs to be 
replaced.

The MAIN POWER is 
switched on again 
before the Lamp unit 
is cooled enough.

LAMP circuit failure, 
abnormal function.

Lamp unit is 
damaged.

Let the Lamp unit cool 
down and turn on the 
MAIN POWER.

Contact an Authorized 
Service Center.

 

Illuminating RED and still projecting

 

Flashing RED and POWER is turned off

The temperature inside and/or outside the projector is abnormally high.

The ventilation 
openings are covered.

The room temperature 
is too high.

The ARFis excessively 
dirty and the ventilation 
is poor.

The projector is located 
at high elevations 
(above 1 400 m).

Remove the object(s) 
from the ventilation 
openings or clear 
around the projector.

Reinstall the t a 
temperature controlled 
place. See page 16.

Replace the ARF in the 
proper method. See 
page 42.

Turn on the projector

*1

 

and set the 
HIGHLAND to ON. 
See page 38.

*1. The projector will perform only 2 minutes with OFF setting at high elevation.

 

Illuminating RED

 

Flashing RED

 

Illuminating ORANGE

 

Flashing ORANGE

FILTER REMAINING 
has turned red. See 
page 37.

The projector cannot 
detect the ARF.

The ARF cannot 
operate properly.

FILTER REMAINING 
has turned yellow. See 
page 37.

ARF has been run out. ARF is not attached.

Foreign object is 
blocking the ARF 
operation.

ARF is running out.

Attach the ARF.

Remove the foreign 
object or contact an 
Authorized Center.

Prepare the ARF for 
replacement.