Справочник Пользователя для Panasonic PT-AE2000U

1. Switch on the connected devices.

 

Press the play button of the required device.

2. Press the INPUT button to select the required input 

method if needed. See “Switching the input signal” 
on page 23.

 

The image will be projected on the screen.

1. Press the ASPECT button to select the required 

aspect mode. See “Switching the aspect ratio” on 
page 23.

2. Adjust the projected image with the lens shift dials. 

3. Adjust the angle of the projector.

 

Screw down the front leg adjusters and adjust the 
angle vertically.

 

4. Adjust the focus and the projected image size.

 

Press +/- of the FOCUS and ZOOM buttons to 
adjust.

 

Press the LENS button to adjust the focus and zoom 
by the remote control. See........................

• AUTO SEARCH is ON as default and the signal from 

the connected devices is detected automatically. See 
“AUTO SEARCH” on page 40.

• Do not touch the air exhaust port as this may cause 

burns or injury.

• If keystone distortion occurs, see “KEYSTONE” on 

• If you adjust the focus, you may need to adjust the size 

of the image by pressing the ZOOM button again.