Справочник Пользователя для Mitsubishi Electronics XD490U
EN-13
ENGLISH
2
1
2
1
Viewing computer images
A. Connecting the projector to a computer
Preparation:
• Make sure that the power of the projector and that of the computer are turned off.
• When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.
• Make sure that the power of the projector and that of the computer are turned off.
• When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.
For analog connection:
1. Connect one end of the supplied RGB cable to the
COMPUTER IN/COMPONENT VIDEO IN-1/2 terminal of the
projector.
projector.
2. Connect the other end of the RGB cable to the monitor
port of the computer.
• Additional devices, such as a conversion connector and an
analog RGB output adapter, are required depending on the
type of the computer to be connected.
type of the computer to be connected.
• When viewing images supplied from an analog-connected
computer, press the COMPUTER button on the remote
control.
control.
For digital connection:
1. Connect one end of a commercially available DVI cable to
1. Connect one end of a commercially available DVI cable to
the DVI-D (HDCP) terminal of the projector.
2. Connect the other end of the DVI cable to the DVI terminal
of the computer.
• Additional devices, such as a conversion connector and an
analog RGB output adapter, are required depending on the
type of the computer to be connected.
type of the computer to be connected.
• When viewing images supplied from a digital-connected
computer, press the DVI-D(HDCP) button on the remote
control.
control.
For audio connection:
• Plug the power cord of the projector in the wall outlet fi rst,
• Plug the power cord of the projector in the wall outlet fi rst,
and then boot up the computer.
• This projector uses stereo pin jack for its audio input. Check
the type of the audio output terminal of the connected
computer and prepare a proper cable for connection. Some
computers don't have the audio output terminal.
computer and prepare a proper cable for connection. Some
computers don't have the audio output terminal.
• Speaker output is mono.
• When the audio cable is connected to the AUDIO OUT ter-
• When the audio cable is connected to the AUDIO OUT ter-
minal, the speaker output is muted.
For monitor connection:
1. Connect one end of the RGB cable that is connected to the
1. Connect one end of the RGB cable that is connected to the
MONITOR OUT terminal of the projector.
COMPUTER IN/
COMPONENT VIDEO IN
COMPONENT VIDEO IN
DVI-D (HDCP)
to monitor port
RGB cable
DVI cable
to DVI
AUDIO OUT
AUDIO IN
Computer
PC audio cable (option)
to PC audio
output
output
RGB cable
Monitor