Справочник Пользователя для Mitsubishi Electronics XD2000U

EN-28

This projector is equipped with the password function 
that is designed for prevention of wrong operation by 
children and restriction on operation by other than 
specifi ed users. 
DISPLAY INPUT ...........When the projector is turned 

on, the startup screen (or splash screen) will appear 
and stay on the screen until the password is entered. 
When the password is entered, the startup screen 
will switch to the regular operation screen.

MENU ACCESS ........... All the buttons except for the 

POWER button on the projector are disabled. (The 
buttons on the remote control are enabled.) You can 
use this mode as a measure of prevention of wrong 
operation by children and restriction on operation 
by other than specifi ed users.

1.  Display the FEATURE menu.

2. Press the 

 or  button to select PASSWORD 

FUNCTION.

3. Press the 

 or  button to change the mode among 

DISPLAY INPUT   and MENU ACCESS  .
•  When there is a password already set, the pass-

word cancel menu is automatically selected. To 
set a new password, disable the password lock 
function. 

4.  Press the ENTER button.

•  The screen for setting the password function will 

appear. 

5.  Press the ENTER button.

•  The screen for entering a password will appear. 

6. Press the 

 or  button to select a number from 0 

to 9.

7. Press the 

 button.

•  You can set the next digit. 

8.  Repeat steps 6 and 7 to set a 4-digit password. 

9.  Enter the password again for confi rmation using the 

same steps.

10. Select OK, and press the ENTER button. 

•  If the entered passwords don’t match, an error 

message will appear. 

•  To cancel the procedure, select CANCEL and 

press the ENTER button. 

•  You can cancel the procedure by pressing the 

MENU button alternatively. 

1.  Display the FEATURE menu.

2. Press the 

 or  button to select PASSWORD 

FUNCTION.

3.  Press the ENTER button.

•  The screen for canceling the password function 

will appear.

4.  Press the ENTER button.

•  The screen for entering the password will 

appear. 

5. Press the 

 or  button to select a number from 0 

to 9.

6. Press the 

 button.

•  You can set the next digit. 

7.  Repeat steps 5 and 6 to enter the four-digit 

password. 

8. Press the 

 button, select OK, and press the 

ENTER button.
•  If you enter a wrong password, an error message 

will appear.

•  To cancel the procedure, press the 

 button, 

select CANCEL, and press the ENTER button. 

•  You can cancel the procedure by pressing the 

MENU button alternatively. 

Important:
•  Disable the password by pressing the MENU and 

ENTER buttons on the control panel at the same 
time.