Справочник Пользователя для Mitsubishi Electronics XD95U

EN-3

• The lens cap is for protecting the lens. If you leave the lens cap on 

the lens with the projector turned on, it may be deformed because of 
heat build-up. Remove the lens cap when you turn on the projector. 

• One of power cords for the U.S., Europe and U.K. is provided appro-

priately.

• This projector uses the power plug of three-pin grounding type. Do 

not remove the grounding pin from the power plug. If the power plug 
doesn’t fit your wall outlet, ask an electrician to change the wall out-
let. 

• In case that the power cord for the U.S. is provided with this projec-

tor, never connect this cord to any outlet or power supply using other 
voltages or frequencies than rated. If you want to use a power sup-
ply using other voltage than rated, prepare an appropriate power 
cord separately. 

• Use 100-240 V AC 50/60 Hz to prevent fire or electric shock. 

• Do not place any objects on the power cord or do not place the pro-

jector near heat sources to prevent damage to the power cord. If the 
power cord should be damaged, contact your dealer for replace-
ment because it may cause fire or electric shock. 

• Do not modify or alter the power cord. If the power cord is modified 

or altered, it may cause fire or electric shock.