Справочник Пользователя для Mitsubishi Electronics XD70U

E-29

General Operation

Enlargement of the Image and Video Movement

This function digitally enlarges the personal computer image and video
image.

(1) Press the ZOOM button to enlarge the image.

The zoom display appears when the ZOOM button is pressed.

Each press of the

왖 button enlarges the image and each press of the

왔 button makes the image smaller (returning it to 1:1).

(No enlargement)

(Approximately 2 times enlargement)

Note:
* Zoom and image movement functions are cancelled when the input is switched.
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected

so that they are not conspicuous.

* Movement of the screen will not be possible when the menu screen is being displayed.

Zoom

(3)

(1)

(2)

FREEZE

MUTE

LASER

AUTO

TIMER

VOL

RGB

VIDEO

R-CLICK/

CANCEL

QUICK

ENTER

STANDBY

ZOOM

Note:
The degree of enlargement will differ depending on the signal.

The image can also be moved in the following circumstances.

•

When “Aspect” is set to “Real” by the signal of the personal computer, and the input resolution is higher than the display
resolution of the projector.

•

When “Aspect” is set to “Zoom” by the video signal.

(3) Press the CANCEL button to immediately close the display.

The display will close when there has not been an operation in about
10 seconds.

(2) Pressing the SELECT

왖왔왗왘 buttons on the remote control at

the time of the zoom operation will cause the display position to
move.
(There will not be any movement when zoom is at 0.)

(Approximately 2 times enlargement)

(Movement)

Zoom

Note:
After magnifying the image, be sure to use the ZOOM button to bring the gauge
value back to “0”.