Справочник Пользователя для Mitsubishi Electronics UL7400U
EN-12
4. Projector registration
<Note>
• Set the default gateways of the projectors and PC correctly. For details, contact your network administrator.
• Be sure to make a note of the IP addresses and default gateways you set. If you forget the setting values, you
• Set the default gateways of the projectors and PC correctly. For details, contact your network administrator.
• Be sure to make a note of the IP addresses and default gateways you set. If you forget the setting values, you
may not be able to detect the projectors again.
• At initial setup, DHCP or Auto IP (169.254.0.1 through 169.254.255.254) automatically assigns an IP address.
Note that a different IP address may be assigned every time you start the projectors. If a connection cannot
be established, execute "Search Projector".
be established, execute "Search Projector".
• If you change the IP address in the projector menu after the projectors have been detected, execute “Search
Projector” again.
• It is recommended that you assign an IP address of the projector to the fixed IP address.
4.3. When changing the projector IP settings
You can change the projector IP settings.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Select "Assign IP" from “Configuration” of the menu bar on the main screen.
(2) Select "Assign IP" from “Configuration” of the menu bar on the main screen.
• “Assign IP” window is displayed.
(3) To automatically assign an IP address, select [Auto] and then select DHCP. To manually
assign an IP address, select [Manual] and enter values for IP Address, Subnet Mask, and
Default Gateway.
Default Gateway.
Item
Description
DHCP
Obtain an IP address via a DHCP server.
IP Address
Enter an IP address.
Subnet Mask
Enter the subnet mask.
Default Gateway
Enter the default gateway address.
<Note>
• An error dialog for theft detection may be displayed after the IP settings have been changed.
• If a connection cannot be established after the IP settings have been changed, execute “Search Projector”.
• If you want to change the IP address of a projector connected via a router, you need to specify a search range
• An error dialog for theft detection may be displayed after the IP settings have been changed.
• If a connection cannot be established after the IP settings have been changed, execute “Search Projector”.
• If you want to change the IP address of a projector connected via a router, you need to specify a search range
of IP addresses that includes the new IP address in “Search Projector Setting”.
• Consult your network administrator about the subnet mask and default gateway in advance.