Справочник Пользователя для Mitsubishi Electronics UL7400U

EN-26

•  Alert E-mail Setup window is displayed.

•  Be sure to enter data within five minutes after the Alert E-mail Setup window is displayed. Click OK to save

changes. The connection will turn off in five minutes after the window is displayed so you need to go back 
to the main window (ALERT E-MAIL) to access the Alert E-mail Setup window.

The following table explains each item.
Regarding the settings, consult your network administrator or check the settings of your E-mail server.

Item 

Description

Alert e-mail service

Turn ON/OFF the sending of an alert E-mail.

SMTP Server *

1

 

Enter the name of the SMTP server that is used for sending an E-mail. (Designate by 

URL or IP address.)

Port *

2

 

Enter the port number of the SMTP server. (Default value: 25)

DNS Server *

3

 

Enter the name of the DNS server when you designate the SMTP server or POP 

server using an URL. (Designate by IP address.) For details, consult your network 

administrator.

E-mail address1/2/3 *

4

Enter the destination address of the alert E-mail. (e.g. administrator@xxx.xxx.xxx)

(Up to 64 characters) (Up to 3 addresses can be designated.)

E-mail from *

4

Enter the source address of the alert E-mail. (e.g. PJView@xxx.xxx.xxx)

Authentication settings 

Configure the following settings when you use the SMTP server having the 

authentication function.

Authentication method 

Select the authentication method for sending an E-mail.

   

OFF: 

No authentication for sending an E-mail.

   

SMTP-Auth: 

To use this method, enter User name, Password, and SMTP-

Auth method.

   

POP before SMTP: To use this method, enter User name, Password, POP Server 

name, and Port number.

User name *

4

 

(When you select the SMTP authentication) Enter the user name and password 

registered on the SMTP server.

Password *

4

 

(When you select the POP before SMTP) Enter the user name and password 

registered on the POP server.

SMTP-Auth method 

Select the SMTP authentication method.

   

Plain: 

Password is sent to the SMTP server unencrypted.

   

Login: 

Password is sent to the SMTP server unencrypted.

   

CRAM-MD5:  Password is sent encrypted.

POP server *

1

 

Enter the POP server name that is used for the POP before SMTP authentication. 

(Designate by URL or IP address.)

Port *

2

 

Enter the port number of the POP server. (Default: 110)

*

1

   Use only alphanumeric characters and marks (- _ . ˜).

*

2

  For data entry, use alphanumeric characters.

*

3

   For data entry, use alphanumeric characters and mark (.).

*

4

 For data entry, use alphanumeric characters and marks (+ - / = * _ ! ? . , : ; # $ % & ( ) | < > [ ] { } " ' @).