Справочник Пользователя для Mitsubishi Electronics WD620U-G

EN-22

Several settings can be adjusted using the menu.

Example : Auto power off time setting

1.

Press the MENU button.

2.

Select the DETAIL MENU and press the ENTER button  (or 

T 

button).

3.

Press the 

W or X button to select INSTALLATION. 

4.

Press the ENTER button (or 

T button).

5.

Press the 

S or T button to select AUTO POWER OFF.

6.

Press the 

W or X button to adjust the auto power off time.

7.

Exit the menu by pressing the MENU button several times.

•

When the button doesn’t function, unplug the power cord from the 
wall outlet. Wait about 10 minutes, plug the power cord in, and try 
again.

•

After selecting the items marked with 

, press the ENTER but-

ton.

Set the following options provided in the respective menus.

•

You cannot adjust TINT when the TV50 (PAL, SECAM) signal is inputted.

•

You cannot adjust COLOR TEMP. when WALL SCREEN is set to other than OFF.

•

When COMPUTER 1 or COMPUTER 2 or HDMI is selected, TINT do not work.

•

When COLOR ENHANCER is switched, projected images may be distorted.

•

Captions are not displayed while information about the menu, volume setting, or input signal selection is being displayed on the screen.

•

The closed caption function displays text information included in the NTSC signal, which is mainly used for TV broadcasting in North America.

COLOR ENHANCER

AUTO

Automatically sets an optimal color balance based on the input signal. 
Use this setting for most cases.

PRESENTATION

Makes projected images bright and crisp.

STANDARD

Makes projected images look natural.

THEATER

Makes projected images soft and smooth. Best suited for movies.

USER

 

Adjusts the gamma curve, color intensity, or balance. (See page 27.)

CONTRAST

±30

Adjusts the contrast of projected images. (See page 27.)

BRIGHTNESS

±30

Adjusts the brightness of projected images. (See page 27.)

COLOR TEMP.

4 options

Adjusts the color temperature. You cannot select this setting when 
WALL SCREEN in the INSTALLATION menu is set to a setting other 
than OFF. (See page 27.)

COLOR

±10

Adjusts the color tone of projected images. (See page 27.) You cannot 
select this setting when the COMPUTER 1 or COMPUTER 2 or HDMI is 
selected as the input source.

TINT

±10

Adjusts the color tint of projected images. (See page 27.) You can select 
this setting only when NTSC is selected as the input signal.

SHARPNESS

±5

Adjusts the sharpness of projected images. (See page 27.)

ADVANCED MENU

OK

 

NOISE REDUCTION

ON/OFF

Reduces noise of projected images when the input signal is noisy.

CTI

ON/OFF

Corrects smeared color borders.

INPUT LEVEL

±5

Adjusts the input level of analog video signals.
The input level of the video signal varies across devices to which the 
projector is connected. A high input level causes projected images to 
appear solid white, and a low input level causes projected images to 
appear dark.

CLOSED CAPTION

OFF

Does not display captions.

CC1/CC2

Displays captions.

3D

ON/OFF

Set to ON/OFF of 3D display.

3D SYNC.

1/2

Switches the order of the image for left eye and for right eye.