Справочник Пользователя для Mitsubishi Electronics WD620U-G

EN-28

Use this setting to make colors with medium brightness, such as yel-
low and the skin tone appear natural. Press the 

W button to decrease 

the value to lessen the effect. Press the 

X button to increase the value 

to heighten the effect. (BrilliantColor

TM

 has no effect at value 0.)

6.

Select a value by pressing the 

W or X button.

•

For more enhanced color reproduction, set BrilliantColor

TM

 

to 0. The white area of the color wheel is disabled, and you 
can reproduce true-color images.

Use to adjust the color intensity of the projected image. Every time the 
X button is pressed, the color becomes thicker. Every time the W but-
ton is pressed, the color becomes lighter.

Use to adjust the color balance of the projected image. Every time the 
X button is pressed, the image appears more greenish. Every time 
the 

W button is pressed, the image appears more reddish.

This projector automatically and properly projects video signals being 
input from the computer. However, some video signals may not be 
projected, depending on the type of the computer. When it occurs, 
press the AUTO POSITION button. (See page 17.) When the signal is 
still not projected properly, adjust the projected image using the SIG-
NAL menu.

Perform the following procedures when the following conditions occur.

When wide strips appear

................. adjust TRACKING in the SIGNAL menu.

When the projected image flickers
When the projected image is blurred

................. adjust FINE SYNC. in the SIGNAL menu.

When the projected image is displaced horizontally

................. adjust HORIZ.POSITION in the SIGNAL 

menu. Every time the 

W button is pressed, 

the image moves to the right. Every time the 
X button is pressed, the image moves to the 
left.

When the projected image is displaced vertically

................. adjust VERT.POSITION in the SIGNAL 

menu. Every time the 

W button is pressed, 

the image moves down. 
Every time the 

X button is pressed, the 

image moves up.

When the top part of the image flags

................. change the setting of HOLD in the SIGNAL 

menu. To select ON 

 , press the ENTER 

button, and adjust BEGIN or END to mini-
mize the flagging.

A solid black or solid white appears in the image

................. adjust CLAMP POSITION or CLAMP 

WIDTH in the SIGNAL - USER menu.

When the motion is not smooth.

................. adjust VERT. SYNC in the SIGNAL - USER 

menu. 
Select AUTO for most cases.

Noise appears in the right or left half of the image.

................. adjust SHUTTER(LS) or SHUTTER(RS) in 

the SIGNAL - USER menu.

Noise appears in the top or bottom part of the image.

................. adjust SHUTTER(U) or SHUTTER(L) in the 

SIGNAL - USER menu.

1.

Display the SIGNAL menu.

2.

Press the 

S or T button to select a setting to adjust.

3.

Adjust the selected setting by pressing the 

W or X button.

4.

Press the MENU button.
•

Do not change the settings of the SIGNAL menu for ordinary 
use.

1.

Align the left edge of the image with the left side of the 
screen by adjusting HORIZ.POSITION. Then, align the right 
edge of the image with the right side of the screen by adjust-
ing TRACKING.

2.

Repeat step 1 to complete the adjustment of the horizontal 
position.

3.

Align the upper edge of the image with the upper side of the 
screen by adjusting VERT.POSITION.

You can select to enable or disable the LPF. This option is set to OFF 
normally.

Vertical or horizontal streaks may appear in the projected image, 
depending on the type of the DVD player, game console or computer 
in use. If this occurs, reduce noise by enabling the LPF. Projected 
images appear slightly faint.