Справочник Пользователя для Mitsubishi Electronics LVP-X30U

E – 9

36

1.2 / 3.93

9.9 / 3.90

60

2.0 / 6.56

16.9 / 6.65

80

2.7 / 8.85

22.5 / 8.86

100

3.4 / 11.15

28.1 / 11.06

120

4.1 / 13.45

33.7 / 13.27

150

5.1 / 16.73

42.2 / 16.61

200

6.8 / 22.30

56.2 / 22.13

The distance from the unit lens to the screen determines to the size of the projected image, therefore, you need to consider the place where you
set up the unit and screen before making connections. You also need to consider the screen size and height of the unit and screen as other
important factors.

A non-glossy wall may be used as a substitute for a screen.

Always carry the unit in the carrying case. Ensure that the power cable and any other cables connecting to video sources are disconnected
before moving the unit. When moving the unit or when it is not in use, cover the lens with the sliding lens cap.

• Only use the unit on a solid flat level surface. If the unit falls to the ground, you may be injured and the unit may severely be damaged.

• Do not use the unit where temperatures vary greatly. The unit must be used at temperatures between 5

°

C (41

°

F) and 35

°

C (95

°

F).

• Do not expose the unit to moisture, dust, or smoke. This will harm the screen image.

• Ensure that you have adequate ventilation around the unit to allow heat dissipation. Do not cover the vents on the bottom or the side of the

unit.

The projected image becomes larger as the distance between the unit and screen increases. The minimum image size is about 36 inches
diagonally at a distance of about 1.2 m (approx. 3.9 feet) and the maximum size is approx. 200 inches at a distance of 6.8 m (approx. 22.3 feet)
from the screen. Use the following information when you fix the position of the unit.

″

″

″

″

″