Справочник Пользователя для Mitsubishi Electronics WD570U

EN-46

To stop the motion in the image temporarily (or to 
display a still image):
Press the FREEZE button on the remote control.
•  The image freezes temporarily.
To resume the motion in the image:
Press the FREEZE button on the remote control again.
Important:
•  Do not keep displaying a still picture for an

extended period of time, as the afterimages may 
linger on the screen.

By pressing the MAGNIFY button on the remote 
control, you can magnify the image to view the details.
•  The MAGNIFY mode doesn’t function with some

input signals. For details, see page 59.

•  The MAGNIFY mode doesn’t work with video or

S-video signal.

Magnified image

To use the MAGNIFY mode:
1.  Press the MAGNIFY button.

•  You can select the area to be magnified by

pressing the , ,  or  button on the 
remote control.

•  You can change the magnification of the

selected area by pressing the VOLUME  or  
button.

2.  Press the MAGNIFY button again to exit the 

MAGNIFY mode.
•  The regular operation screen will appear.

Important:
•  In the MAGNIFY mode, you can’t adjust the

volume.

You can display your desired image as the startup 
screen (or splash screen). Using the menu, you can 
also use it as the background that is displayed while 
the video is muted or no signal is inputted.
Important:

•  You can capture the computer images from the

Computer1, Computer2, and HDMI input sources.

Procedure 
(See page 21 for menu setting.)  
1.  Select the input source Computer1, Computer2, or 

HDMI.

2.  Display your desired image.
3.  Display the Option menu.
4.  Select Image Capture by pressing the  or  

button.

5.  Press the ENTER button.

•  When the capture starts, the captured image will

be displayed.

•  When you press ENTER button once, any button

doesn’t function until the capture completes.

•  When image resolution is lower than XGA (1024

x 768), the image is captured by adjusting its 
resolution to XGA.

•  When image resolution is higher than XGA (1024

x 768), the image area of XGA is only captured.

•  The captured images will be deleted at the same

time as pressing the ENTER button. If you pressed 

ENTER button wrongly, try to capture the same 

images again.

•  The captured image is displayed from the next

startup when Splash Screen in the Option menu is 

set to User. If the captured image isn’t displayed, 

check to see if Splash Screen in the Option menu is 

set to Off. (See page 27.)

•  To display the captured image while the video is

muted, set AV Mute Mode in the Option menu to 

Image User. (See page 27.)

•  When Back Color in the Option menu is set to

Image User, the captured image is displayed while 

no signal is inputted. 

•  Some images can’t be captured correctly because

of their signal type.