Справочник Пользователя для Mitsubishi Electronics XL5950LU

EN – 10

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal
computer that have analog RGB output connectors.

Important:
• Make sure that the connected device is turned off before starting connection.
• Plug in the projector and the connected devices firmly, and unplug them by holding and pulling out their

power plugs, not by pulling the power cords.

• When the projector and the connected devices are located too close to each other, the projected image may be

affected by their interference.

• See the owner’s guide of each device for details about their connections.

Important:
• Connect the video and audio plugs of the AV cable to the proper terminals matching their colors respectively.
• When the connected AV device uses a BNC connector for its video output, connect it to the VIDEO 1 (BNC)

terminal. When both the VIDEO 1 (BNC) terminal and the VIDEO 2 (RCA) terminal are engaged at the same
time, the image supplied to the VIDEO 2 (RCA) terminal takes priority.

• When the connected AV device uses a BNC connector for its S-video output, connect it to the VIDEO 2

(Y,C)(BNC) terminal. When both the VIDEO 2 (Y,C) (BNC) terminal and the S-VIDEO 2 terminal are engaged
at the same time, the image supplied to the S-VIDEO 2 terminal takes priority.

DVD player or HDTV decoder

BNC-RCAconnector
(option)

BNC-BNC cable (option)

AUDIO cable (option)

COMPUTER AUDIO IN

to AUDIO OUT

Some DVD players have an output connector for 3-line fitting (Y, C

B

, C

R

). When connecting such a DVD player

with this projector, use the COMPUTER/COMPONENT VIDEO INPUT 1  terminal.

• The terminals’ names Y, P

B

, and P

R

 are examples of a case where a HDTV decoder is connected.

• The terminals’ names are different depending on the connected devices.
• Use BNC-BNC cables for connection.
• The image may not be projected correctly with some DVD players.
• When connecting a HDTV decoder having RGB output terminals, set the COMPUTER INPUT to RGB in the

SIGNAL menu.

To S-video input

To S-video output

To video input

To audio input

To video output

To audio output

To Y input

To S input

To Y output

To S output

To audio input

To video output

To audio output

To video input