Справочник Пользователя для Mitsubishi Electronics XL2550U

EN-13

2

1

2

1

Preparation: 
•  Make sure that the power of the projector and that of the computer are turned off. 
•  When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor. 

For analog connection: 
1.  Connect one end of the supplied RGB cable to the 

COMPUTER/COMPONENT VIDEO IN-1/IN-2 terminal of 
the projector. 

2.  Connect the other end of the RGB cable to the monitor 

port of the computer.

•  Additional devices, such as a conversion connector and an 

analog RGB output adapter, are required depending on the 
type of the computer to be connected.

For monitor connection: 
1.  Connect the RGB cable from the monitor to the MONITOR 

OUT terminal of the projector. 

COMPUTER/COMPONENT 
VIDEO IN-1/IN-2

COMPUTER/COMPONENT 
VIDEO DVI-D (HDCP)

To monitor port

RGB cable

DVI cable
(option)

To DVI

AUDIO OUT

AUDIO IN-1/IN-2

Computer

PC audio cable (option)

To PC audio
output

MONITOR OUT

Monitor

•  Use of a long cable may decrease the quality of projected images. 
•  Images may not be projected correctly, depending on the type of the connected computer. 
•  Also read the instruction manual of the equipment to be connected. 
•  Contact your dealer for details of connection.

For digital connection: 
1.  Connect one end of a commercially available DVI cable 

to the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) 
terminal of the projector. 

2.  Connect the other end of the DVI cable to the DVI terminal 

of the computer. 

For audio connection: 
•  This projector uses stereo pin jack for its audio input. Check 

the type of the audio output terminal of the connected 
computer and prepare a proper cable for connection. Some 
computers don’t have the audio output terminal.

•  When the audio cable is connected to the AUDIO OUT ter-

minal, the speaker output is muted.

Computer

Computer

RGB cable