Справочник Пользователя для Mitsubishi Electronics SL4SU
EN – 9
ENGLISH
Installation
Layout of the projector
Image size varies depending on the distance between the screen and the projector.
Front projection
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount kit
designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
• The warranty on this projector does not cover any
For ceiling mounting, you need the ceiling mount kit
designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
• The warranty on this projector does not cover any
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling
mount kit in an improper location.
ceiling mount kit or installation of the ceiling
mount kit in an improper location.
• When using the projector mounted on the ceiling,
set IMAGE REVERSE in the INSTALLATION
menu to MIRROR INVERT. See page 16.
menu to MIRROR INVERT. See page 16.
• When the projector is mounted on the ceiling,
images may appear darker than those projected in
the case of tabletop mounting. This isn’t a product
malfunction.
the case of tabletop mounting. This isn’t a product
malfunction.
Rear projection
Ask a specialist for installation. For details, consult
your dealer.
• For rear projection, set IMAGE REVERSE in the
Ask a specialist for installation. For details, consult
your dealer.
• For rear projection, set IMAGE REVERSE in the
INSTALLATION menu to MIRROR. See page 16.
Caution:
• Placing the projector directly on a carpet impairs
• Placing the projector directly on a carpet impairs
ventilation by the fans, causing damage or failure.
Put a hard board under the projector to facilitate
ventilation.
Put a hard board under the projector to facilitate
ventilation.
• Place the projector at least 50 cm (or 20 inch)
away from the wall to prevent the air inlet grille
and the air outlet grilles that emit hot air from
being blocked.
and the air outlet grilles that emit hot air from
being blocked.
• Do not use the projector in the following locations
and manners, which may cause fire or electric
shock.
• In a dusty or humid place.
• In a sideways or upside-down position.
• Near a heater.
• In an oily, smoky, or damp place such as a
shock.
• In a dusty or humid place.
• In a sideways or upside-down position.
• Near a heater.
• In an oily, smoky, or damp place such as a
kitchen.
• In direct sunlight.
• Where the temperature rises high, such as in a
• Where the temperature rises high, such as in a
closed car.
• Where the temperature is lower than +41°F (or
+5˚C) or higher than +95°F (or +35˚C).
Important:
• Do not apply force to the lens, because the lens
• Do not apply force to the lens, because the lens
may be damaged.
W
A
A=B
B
H
Hd
L
• The above figures are approximate and may be slightly different from the actual measurements.
L
: Between the screen and the front edge of the projector
Hd : Height of the projected image
40
102
32
81
24
61
49
1.3
60
1.5
2.4
6.1
60
152
48
122
36
91
75
1.9
91
2.3
3.6
9.1
80
203
64
163
48
122
101
2.6
121
3.1
4.8
12.2
100
254
80
203
60
152
126
3.2
152
3.9
6.0
15.2
150
381
120
305
90
229
191
4.8
229
5.8
9.0
22.9
200
508
160
406
120
305
255
6.5
306
7.8
12.0
30.5
250
635
200
508
150
381
319
8.1
383
9.7
15.0
38.1
300
762
240
610
180
457
383
9.7
–
–
18.0
45.7
Screen
Distance from the screen : L
Diagonal size
Width : W
Height : H
Maximum
Minimum
Hd
zoom (WIDE)
zoom(TELE)
inch
cm
inch
cm
inch
cm
inch
m
inch
m
inch
cm