Справочник Пользователя для Mitsubishi Electronics SE1U

5

4

11. Power-cord protection

Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Pay particular attention to cords at
plugs, convenience receptacles, and points where they exit from the appliance. Do
not put the power cord under a carpet.

12. Overloading

Do not overload wall outlets and extension cords as this can result in a fire or
electric shock.

13. Objects and liquids

Never push objects of any kind through openings of this projector as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.

14. Servicing

Do not attempt to service this projector yourself. Refer all servicing to qualified
service personnel.

15. Damage requiring service

Unplug this projector from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
(a)

If the power-supply cord or plug is damaged.

(b)

If liquid has been spilled, or objects have fallen into the projector.

(c)

If the projector does not operate normally after you follow the operating
instructions. Adjust only those controls that are covered by the operating
instructions. An improper adjustment of other controls may result in
damage and may often require extensive work by a qualified technician to
restore the projector to its normal operation.

(d)

If the projector has been exposed to rain or water.

(e)

If the projector has been dropped or the  cabinet has been damaged.

(f)

If the projector exhibits a distinct change in performance - this indicates a
need for service.

16. Replacement parts

When replacement parts are required, be sure that the service technician has used
replacement parts specified by the manufacturer or parts having the same
characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.

17. Safety check

Upon completion of any service or repair to this projector, ask the service technician
to perform safety checks determining that the projector is in a safe operating
condition.

Do not operate if smoke, strange noise or odor comes out of your projector. It may cause
fire or electric shock. In this case, unplug immediately and contact your dealer.

This projector contains high voltage circuitry. An inadvertent contact may result in an
electric shock. Except as specifically explained in User Manual, do not attempt to service
this product by yourself. Please contact your dealer when you want to fix, adjust, or inspect
the projector.

It can lead to fire or electric shock.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact
your dealer for inspection. It may lead to fire if you keep using the damaged projector.

It can lead to fire.

If you use incorrect voltage, it can lead to fire.

Place the projector on a level and stable surface only.

It may hurt your eyes. Never let children look into the lens when the projector is on.

It can lead to lamp breakage, fire, electric shock or other trouble. Wait for the fan to stop
before unplugging the power cord.

Do not touch them or put other equipment close to the air outlet grilles because they
become hot during operation. The heated air outlet grilles and bottom plate may cause
injury or damage to other equipment. Also, do not put the projector on a desk that is easily
affected by heat.

Clean the air-filter frequently. If the filter or ventilation slots become clogged with dirt or
dust, the temperature inside of the projector may rise and cause some troubles, such as
damage of inside parts, and shortening the life of the panels.

Heat, dust, etc. may blow out of them and hurt your eyes.