Справочник Пользователя для NEC NP-VE281

No image is displayed from your PC or video equipment to the 

projector�

Still no image even though you connect the projector to the PC 

first, then start the PC.
Enabling your notebook PC’s signal output to the projector�
•  A  combination  of  function  keys  will  enable/disable  the 

external display� Usually, the combination of the “Fn” key 

along with one of the 12 function keys turns the external 

display on or off� 

No image (Logo, blue or black background, no display)�
Still no image even though you press the AUTO ADJ� button�
Still no image even though you carry out [RESET] in the 

projector’s menu�
Signal cable’s plug is fully inserted into the input connector
A message appears on the screen�

( _____________________________________________ )
The source connected to the projector is active and available�
Still no image even though you adjust the brightness and/or 

the contrast�
Input source’s resolution and frequency are supported by the 

projector�

Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by 
referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem 

more efficiently.

* Print this page and the next page for your check.

Frequency of occurrence   always     sometimes (How often?_____________________)   other (__________________)
Power

No power (POWER indicator does not light green)� See also “Status 

Indicator (STATUS)”�

Power cord’s plug is fully inserted into the wall outlet�
No power even though you press and hold the POWER button�

Shut down during operation�

Power cord’s plug is fully inserted into the wall outlet�
[AUTO POWER OFF] is turned off

Image is too dark�

Remains unchanged even though you adjust the brightness 

and/or the contrast�

Image is distorted�

Image appears to be trapezoidal (unchanged even though you 

carry out the [KEYSTONE] adjustment)�

Parts of the image are lost�

Still unchanged even though you press the AUTO ADJ� button�
Still unchanged even though you carry out [RESET] in the 

projector’s menu�

Image is shifted in the vertical or horizontal direction�

Horizontal and vertical positions are correctly adjusted on a 

computer signal�
Input source’s resolution and frequency are supported by the 

projector�
Some pixels are lost�

Image is flickering.

Still unchanged even though you press the AUTO ADJ� button�
Still unchanged even though you carry out [RESET] in the 

projector’s menu�
Image shows flickering or color drift on a computer signal.
Still unchanged even though you change [FAN MODE] from 

[HIGH ALTITUDE] to [AUTO]�

Image appears blurry or out of focus�

Still unchanged even though you checked the signal’s resolution 

on PC and changed it to projector’s native resolution�
Still unchanged even though you adjusted the focus�

No sound�

Audio cable is correctly connected to the audio input of the 

projector�
Still unchanged even though you adjusted the volume level�

Remote control does not work�

No obstacles between the sensor of the projector and the 

remote control�
Projector is placed near a fluorescent light that can disturb the 

infrared remote controls�
Batteries are new and are not reversed in installation� 

Buttons on the projector cabinet do not work

[CONTROL PANEL LOCK] is not turned on or is disabled in 

the menu�
Still unchanged even though you press and hold the SOURCE 

button for a minimum of 10 seconds�