Справочник Пользователя для Mitsubishi Electronics EX53E
EN-27
ENGLIS
H
How to use the administration screen (continued)
Changing the network settings
•
For the setting items, ask your network administrator.
1.
Click "Network Setup".
2.
Change the settings, then click the [Apply] button.
•
You can change the following settings.
•
When using multiple units of the wireless projector, do not
overlap the settings for "SSID" in "Wireless Setup".
overlap the settings for "SSID" in "Wireless Setup".
3.
Check the displayed settings, then click the [OK] button.
4.
Reboot the system.
•
•
The specified settings can be applied.
•
It takes approximately one minute to reboot the system.
Settings
Contents
IP Setup
• If the projector is connected to a DHCP
network, select "Obtain an IP address
automatically".
automatically".
• If the projector is used with a static IP,
select "Use the following IP address:", and
then specify the values for "IP Address",
"Subnet Mask", and "Default Gateway".
then specify the values for "IP Address",
"Subnet Mask", and "Default Gateway".
• You cannot specify prohibited IP addresses
such as 0.0.0.0 and 255.255.255.255.
DHCP Server Setup
• If the projector is connected to computers,
it functions as a server and can assign IP
addresses to the computers. If you want
the projector to assign IP addresses, select
"Auto".
addresses to the computers. If you want
the projector to assign IP addresses, select
"Auto".
• If you select "Auto", select "Obtain an IP
address automatically" for the TCP/IP set-
tings in the computer.
tings in the computer.
• The range in which the IP addresses are
assigned is displayed in "Start IP" and
"End IP". These IP addresses are changed
automatically if the IP address of the pro-
jector is changed.
"End IP". These IP addresses are changed
automatically if the IP address of the pro-
jector is changed.
Wireless Setup
• You can choose "Enable" or "Disable" for
"Wireless LAN". If you selected "Disable"
for "Wireless LAN", you can enable it again
by connecting using Wired LAN or perform-
ing NETWORK RESET in the WIRELESS
menu of the projector.
for "Wireless LAN", you can enable it again
by connecting using Wired LAN or perform-
ing NETWORK RESET in the WIRELESS
menu of the projector.
• You can specify a value of 14 digits that fol-
low "Wireless Projector" as a SSID.
• If you enable "SSID Broadcast", you can
search "Wireless Projector" automatically.
Also, you can disable "SSID Broadcast" for
security improvement. If you selected "Dis-
able" for "SSID Broadcast", you can enable
it again by connecting using Wired LAN or
performing NETWORK RESET in the
WIRELESS menu of the projector.
Also, you can disable "SSID Broadcast" for
security improvement. If you selected "Dis-
able" for "SSID Broadcast", you can enable
it again by connecting using Wired LAN or
performing NETWORK RESET in the
WIRELESS menu of the projector.
Channel
• The model for North America has 11 chan-
nels, and that for Europe has 13 channels.
If you select "Auto", you can select a chan-
nel, which is in an optimum radio wave
environment, from the above channels.
If you select "Auto", you can select a chan-
nel, which is in an optimum radio wave
environment, from the above channels.
• If the radio wave environment is poor dur-
ing use, switch to another channel manu-
ally.
ally.
WEP
• You can improve security for the wireless
communication by encrypting it between
the projector and computers.
the projector and computers.
• If you use the WEP function, select 128-bit
(ASCII: 13 characters), 64-bit (ASCII: 5
characters), 128-bit (Hex: 26 digits), or 64-
bit (Hex: 10 digits). Specify a key according
to the number of the characters/digits.
characters), 128-bit (Hex: 26 digits), or 64-
bit (Hex: 10 digits). Specify a key according
to the number of the characters/digits.
• You are required to enter the above speci-
fied key when connecting the projector
wirelessly. Enter the specified key.
wirelessly. Enter the specified key.