Справочник Пользователя для Promise Technology m210p
Chapter 5: Management with the CLU
163
Note: There is only one user. The default name is cim. No changes are
possible.
possible.
Note: CIM service must be running to change the password.
The default password is password.
8.
Highlight Change Password... and press Enter to change the password.
9.
Highlight Old Password and type the current password.
10. Highlight New Password and type a new password.
11. Highlight Retype Password and type the new password again.
12. Press Ctrl-A to save your settings.
To start, stop or restart the CIM service, highlight Start, Stop, or Restart and
press Enter.
press Enter.
Netsend
1.
Highlight Netsend and press Enter.
2.
Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
and Manual.
3.
Press Ctrl-A to save your settings.
To start, stop or restart the Netsend service, highlight Start, Stop, or Restart and
press Enter.
press Enter.
Netsend Recipients
Note that the Messenger service must be running on the recipient PC in order to
receive reports.
receive reports.
To add a recipient:
1.
Highlight Netsend and press Enter.
2.
Highlight Message Recipient and press Enter.
3.
Highlight Create New Message Recipient and press Enter.
4.
Type the recipient’s IP address into the field provided.
5.
Highlight Message Event Severity Filter and press the spacebar to change
severity levels.
severity levels.
The selected level and all higher severity levels of severity will be reported.
Severity levels (from lowest to highest) are: Info, Warning, Minor, Major,
Critical, and Fatal.
Severity levels (from lowest to highest) are: Info, Warning, Minor, Major,
Critical, and Fatal.
6.
Press Ctrl-A to save your settings.
To change recipient settings:
1.
Highlight the recipient whose settings you want to change and press Enter.
2.
Type the recipient’s IP address into the field provided.