Справочник Пользователя для Promise Technology m210p
Chapter 2: Installation
13
Connect Network and Data Cables
Figure 8. VTrak M310p/M210p DAS connections
This arrangement requires:
•
A network switch
•
A network interface card (NIC) in the PC
•
A SCSI HBA card in the PC
•
A SCSI cable that fits your HBA card and has a VHDCI connector to fit the
VTrak SCSI channel
VTrak SCSI channel
VTrak’s SCSI connectors are bi-directional. However, the internal termination
feature works only on the “Out” connector. Internal termination is set to
“Automatic” by default.
feature works only on the “Out” connector. Internal termination is set to
“Automatic” by default.
Connect the PC’s standard NIC and VTrak’s Management Port to your network
switch to establish the management path.
switch to establish the management path.
Connect a SCSI cable to the PC’s SCSI HBA card and one of the VTrak’s SCSI
channels. To use the internal termination feature, attach the SCSI cable to the
“In” connector. An external terminator is not required for this arrangement.
channels. To use the internal termination feature, attach the SCSI cable to the
“In” connector. An external terminator is not required for this arrangement.
If you plan to connect multiple VTraks on a SCSI chain, connect the other side of
the same SCSI channel on the first VTrak to a SCSI channel on the second
VTrak.
the same SCSI channel on the first VTrak to a SCSI channel on the second
VTrak.
See “Chapter 4: Management with WebPAM PROe” on page 37 and “Chapter 5:
Management with the CLU” on page 119 for more information.
Management with the CLU” on page 119 for more information.
O
I
O
I
Mgmt
CONSOLE
In
In
Out
Out
PC/Server
VTrak
Network
Switch
Switch
In connector
SCSI Channel
(1 of 2)
Management Port
SCSI HBA Card
NIC