Справочник Пользователя для Promise Technology m210p
Chapter 3: Setup
27
•
Disk Arrays – The number of physical drives in the disk array, their ID
numbers, configurable capacity and the number of logical drives to be
created
numbers, configurable capacity and the number of logical drives to be
created
•
Logical Drives – The ID number of the logical drive(s), their RAID level,
capacity and stripe size
capacity and stripe size
•
Spare Drives – The physical drive ID number of the dedicated hot spare
assigned to this disk array
assigned to this disk array
If you accept these parameters, click the Submit button. The new disk array
appears in the Disk Array List on the Information tab.
appears in the Disk Array List on the Information tab.
If you do NOT accept these parameters, use the Express (below) or Advanced
(page 29) option to create your disk array.
(page 29) option to create your disk array.
Express
The Disk Array Express Creation option enables you to choose the parameters
for a new disk array by specifying the characteristics you want. With this method,
you can create multiple logical drives at the same time you create your disk array.
However, all of the logical drives will be the same size and RAID level.
for a new disk array by specifying the characteristics you want. With this method,
you can create multiple logical drives at the same time you create your disk array.
However, all of the logical drives will be the same size and RAID level.
If you prefer to specify the parameters directly, use the Advanced option to create
your disk array.
your disk array.
If you are uncertain about choosing parameters for your disk array, use the
Automatic option.
Automatic option.