Справочник Пользователя для Promise Technology m210p
Chapter 4: Management with WebPAM PROe
69
SNMP
VTrak's SNMP service enables the SNMP browser to obtain information from the
VTrak. The Trap Sink is where SNMP events are sent and can be viewed.
VTrak. The Trap Sink is where SNMP events are sent and can be viewed.
To change the SNMP settings:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Administrative Tools
icon.
3.
Click on the SNMP Management link.
4.
Enter the SNMP Port number.
161 is the default.
5.
Enter a System Name.
There is no default name.
6.
Enter a System Location.
USA is the default.
7.
Enter a System Contact (the email address of the administrator or other
individual).
individual).
8.
Enter the Read Community
Public is the default.
9.
Enter the Write Community
Private is the default.
10. Enter a Trap Sink IP address.
11. Select a Trap Filter and click on its option.
12. Tap sinks of the selected Severity level and above will be sent.
13. Click on the Update button and review your Trap Sinks.
14. When you are done, click on the Submit button.
15. Click OK in the confirmation box to restart the SNMP service with your
changes.
Change Start Setting
To change the SNMP Automatic/Manual start setting:
1.
Click the Subsystem
icon in Tree View.
2.
Click the Administrative Tools
icon.
3.
Click on the SNMP Management link.
4.
Under Startup Type:
•
Click on the Automatic option to start the service automatically during
system startup.
system startup.