Справочник Пользователя для Mitsubishi Electronics HC7800DW
EN-9
30°
30°
30°
30°
Operational range of the remote control
Vertical directions (ceiling mount)
Reception angle
Vertical directions
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (15 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
from the remote control to the projector via the screen
within about 5 m (15 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
Operate the remote
control within a
distance of 10 m (30
feet) from the projector,
pointing the IR beam
at the remote control
photo-sensor (front or
rear) of the projector.
control within a
distance of 10 m (30
feet) from the projector,
pointing the IR beam
at the remote control
photo-sensor (front or
rear) of the projector.
• Keep the remote control photo-sensor out of direct
sunlight or fluorescent lamp light.
• Keep the remote control photo-sensor at least 2 m
(6 feet) away from fluorescent lamps. Otherwise,
the remote control may malfunction.
the remote control may malfunction.
• If there is an inverter-operated fluorescent lamp
near the remote control, the remote control
operation may become unstable.
operation may become unstable.
• When you use the remote control too close to the
remote control sensor, the remote control may not
work correctly.
work correctly.
• A remote control may operate improperly while
you watch the 3D images. However, it is not a
malfunction.
malfunction.
• When a remote control operates improperly
while you watch the 3D images, switch REMOTE
POSITION in the FEATURE menu to FRONT or
REAR.
POSITION in the FEATURE menu to FRONT or
REAR.
Front of projector
Rear of projector
Using the remote control
20°
10°
20°
10˚
10˚
20°
20°