Справочник Пользователя для Mitsubishi Electronics HC6800

EN-22

2

1

Make sure that the power of the projector and that of the computer are turned off.

•

When connecting the projector to a desktop computer, disconnect the RGB cables that are connected to the 

•

monitor. 

Connect one end of the supplied RGB cable to the 

1. 

COMPUTER IN/COMPONENT VIDEO IN terminal of the 
projector.
Connect the other end of the RGB cable to the monitor 

2. 

port of the computer.
Additional devices, such as a conversion connector and an 

•

analog RGB output adapter, are required depending on the 
type of the computer to be connected.
When viewing images supplied from an analog-connected 

•

computer, press the COMPUTER button on the remote 
control.

Turn on the power of the projector before that of the computer.

•

Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending 

•

on the type of the computer to be connected.
Use of a long cable may decrease the quality of projected images.

•

Also read the instruction manual of the equipment to be connected.

•

Images may not be projected correctly, depending on the type of the computer connected.

•

Contact your dealer for details of connection.

•

The COMPUTER IN/COMPONENT VIDEO IN terminal of this projector complies with the DDC1/2B standard and the 
HDMI IN-1 and HDMI IN-2 terminals comply with the DDC2B standard. When a computer supporting this standard 
is connected to this terminal, the computer will automatically load the information from this projector and prepare for 
output of appropriate images.

When connecting a DDC-supporting computer to the projector, turn on the main power switch of the projector 

•

before starting the computer. 

Plug the power cord in the same way as described in “Viewing video images.” (See page 17.)

To monitor port

COMPUTER IN/

COMPONENT VIDEO IN

RGB cable