Справочник Пользователя для Mitsubishi Electronics HC7800D

Скачать
Страница из 61
EN-10
Setting up your projector
Setting up the screen
Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the 
projection angle of the projector. (See page 12.)
•  Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of
the screen center.
•  Do not install the screen where it is exposed to direct sunlight or lighting. Light directly reflecting on the screen
makes the projected images washed-out and hard to view.
SCREEN SIZE
You can keep the image display area within the screen by setting SCREEN SIZE in the ADVANCED MENU of IMAGE 
menu according to the aspect ratio of the actual screen. Select 16:9 when the aspect ratio of the screen is 16:9 or 
4:3, and select CINEMA SCOPE (2.35:1) when the aspect ratio is 2.35:1 (CinemaScope).
When setting SCREEN SIZE to CINEMA SCOPE (2.35:1):
•  CinemaScope size movies are projected in the full screen.
•  Set ASPECT in the FEATURE menu to 16:9 when displaying Vista-size images. In this case, they are squeezed
horizontally.
•  When ASPECT in the FEATURE menu is set to AUTO and 480i/p, 576i/p, 720p, or 1080i/p signal is input, the part
for displaying subtitles is not projected. To display subtitles, reset SCREEN SIZE to 16:9 and adjust the image 
position using VERTICAL LOCATION in the ADVANCED MENU of the IMAGE menu. (To display the menu on the 
screen, adjust SHUTTER(U) in the SIGNAL - USER menu to position the menu.)
Screen size and projection distance
Refer to the following tables to determine the screen size and projection distance.
•  The figures in the tables are approximate and may be slightly different from the actual measurements.
•  The lens shift height shows distances from the factory default position.
Screen width (SW)
Down side
Up side
Screen
Scr
een height (SH
)
Hd
H2
H1
L
When the aspect ratio of the screen is 16:9
Screen size (16:9)
Projection distance (L)
Hd
Lens shift height
Diagonal size Height (SH)
Width (SW) Shortest (Wide) Longest (Tele)
H1
H2
inch
cm
inch
cm
inch
cm
inch
m
inch
m
inch
cm
inch
cm
inch
cm
50
127 
25 
62 
44 
111 
59 
1.5 
89 
2.3 
21 
60
152 
29 
75 
52 
133 
71 
1.8 
107 
2.7 
10 
25 
11 
70
178 
34 
87 
61 
155 
84 
2.1 
125 
3.2 
12 
29 
12 
11 
80
203 
39 
100 
70 
177 
96 
2.4 
144 
3.6 
13 
34 
14 
12 
90
229 
44 
112 
78 
199 
108 
2.7 
162 
4.1 
15 
38 
16 
14 
100
254 
49 
125 
87 
221 
120 
3.1 
180 
4.6 
16 
42 
18 
16 
110
279 
54 
137 
96 
244 
133 
3.4 
198 
5.0 
18 
46 
20 
17 
120
305 
59 
149 
105 
266 
145 
3.7 
216 
5.5 
20 
50 
21 
19 
150
381 
74 
187 
131 
332 
182 
4.6 
271 
6.9 
25 
63 
11 
27 
23 
200
508 
98 
249 
174 
443 
243 
6.2 
362 
9.2 
33 
84 
14 
36 
12 
31 
250
635 
123 
311 
218 
553 
304 
7.7 
-
-
41 
105 
18 
45 
15 
39 
300
762 
147 
374 
261 
664 
365 
9.3 
-
-
49 
126 
21 
54 
18 
47 
•  Projection distance changes according to the setting of SCREEN SIZE in the ADVANCED MENU in the IMAGE menu. The table above is in the
case of “16:9.”
•  Depending on the installation conditions, warm air that is emitted from the exhaust vents may flow into the intake
vent, causing the projector to display “TEMPERATURE!!” and then stop projecting images.