Справочник Пользователя для TP-LINK TL-SG3424P
RMON Group
Function
Alarm Group
Alarm Group is configured to monitor the specific alarm variables. When the
value of a monitored variable exceeds the threshold, an alarm event is
generated, which triggers the switch to act in the set way.
The
RMON Groups can be configured on the History Control, Event Config and Alarm Config
pages.
13.3.1 History Control
On this page, you can configure the History Group for RMON.
Choose the menu
Choose the menu
SNMP→RMON→History Control to load the following page.
Figure 13-9 History Control
The following entries are displayed on this screen:
History Control Table
Select:
Select the desired entry for configuration.
Index:
Displays the index number of the entry.
Port:
Specify the port from which the history samples were taken.
Interval:
Specify the
interval to take samplings from the port.
Owner:
Enter the name of the device or user that defined the entry.
Status:
Select Enable/Disable the corresponding sampling entry.
13.3.2 Event Config
On this page, you can configure the RMON events.
216