Справочник Пользователя для Cabletron Systems TSX-1620
Managing the Device
2-19
Using the TSX-1620 Hub View
3.
To define permissions for the selected entry, click on the Read Only or Read
Write option, as desired. The selected permission will be reflected in the list
entry.
Write option, as desired. The selected permission will be reflected in the list
entry.
4.
To establish an IP address to which SNMP traps will be sent, highlight the
contents of the Trap IP field, type the desired IP address, and press Enter or
Return on your keyboard. The selected list entry will change to reflect the new
trap IP address. The default value for this field is 0.0.0.0; if this field is left at
the default value, no traps will be sent.
contents of the Trap IP field, type the desired IP address, and press Enter or
Return on your keyboard. The selected list entry will change to reflect the new
trap IP address. The default value for this field is 0.0.0.0; if this field is left at
the default value, no traps will be sent.
The Refresh button initiates a new request for Community Name information.
When this button is clicked, the TSX-1620 will be queried for its community name
configuration, and any changes that have occurred since the window was opened
(or since the Refresh button was last clicked) will be reflected in the Community
Name window.
When this button is clicked, the TSX-1620 will be queried for its community name
configuration, and any changes that have occurred since the window was opened
(or since the Refresh button was last clicked) will be reflected in the Community
Name window.
Configuring Your TSX-1620’s Serial Port
The Console Config utility allows you to configure your TSX-1620’s serial (local
management) port. Using the Console Config window you can view the port’s
hardware type, select its speed, define the number of bits per character and stop
bits, configure the parity and flow control, and enable or disable ANSI graphics
for the port. To launch the Console Config window from the TSX-1620 Hub View:
management) port. Using the Console Config window you can view the port’s
hardware type, select its speed, define the number of bits per character and stop
bits, configure the parity and flow control, and enable or disable ANSI graphics
for the port. To launch the Console Config window from the TSX-1620 Hub View:
1.
Click on the module index or module type to display the Module menu (see
2.
Drag down to Module Utilities, then right to Console Config, and release.