Справочник Пользователя для Cabletron Systems 2H22
System Resources Information Screen
Local Management Supplement
1-9
DRAM Installed (Read-Only)
Indicates the amount of DRAM installed in the SmartSwitch and how
much of it is currently available.
much of it is currently available.
NVRAM Installed (Read-Only)
Indicates the amount of NVRAM installed in the SmartSwitch and how
much of it is currently available.
much of it is currently available.
Current Switch Utilization (Read-Only)
Shows the percentage of the device switching capacity currently being
used.
used.
Peak Switch Utilization (Read-Only)
Shows the peak percentage of device switching capacity used, since the
last reset.
last reset.
Reset Peak Switch Utilization (Toggle)
Used to reset the Peak Switch Utilization field. The switch may be set to
either YES or NO as described in
either YES or NO as described in
. YES resets the Peak
Switch Utilization field to the current system utilization.
1.4.1
Resetting the Reset Peak Switch Utilization
To set the Reset Peak Switch Utilization field to YES or NO, proceed as
follows:
follows:
1.
Use the arrow keys to highlight the Reset Peak Switch Utilization
field.
field.
2.
Press the SPACE bar to select YES or NO.
3.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
the screen.
4.
Press ENTER. The message “SAVED OK” displays and the Reset
Peak Utilization counter resets to zero.
Peak Utilization counter resets to zero.