Справочник Пользователя для Pelco c1515m-a
Pelco Manual C1515M-A (11/01)
59
Figure 47. Access the Port Screen
SET SERIAL PORT:
Select the number of the desired Serial Port/COM port (01-10).
The serial port numbers correspond to the communication ports on
the CM6800 rear panel as follows:
the CM6800 rear panel as follows:
Serial Port
Input on CM6800 rear panel
01
COM 1
NOTE:
COM 1 can be accessed through a DB9
input or an RJ-45 port.
02-08
COM 2-8 RJ-45 inputs
09
PTZ-A control input
10
PTZ-B control input
DEVICE:
Select the device connected to the COM port; the values in the
TYPE, BAUD RATE, PARITY, DATA BITS, and STOP BITS fields
change to the settings appropriate for the specific device.
TYPE, BAUD RATE, PARITY, DATA BITS, and STOP BITS fields
change to the settings appropriate for the specific device.
TYPE:
If necessary, and if allowed, select the desired communication type
(RS-232, RS-422, or RS-485).
(RS-232, RS-422, or RS-485).
BAUD RATE:
Select the desired baud rate.
PARITY:
Select the desired parity type.
DATA BITS:
This value cannot be changed.
STOP BITS:
This value cannot be changed.
PELCO SWITCHER
MODEL CM6800
MAIN MENU
1
CAMERA
2
LOGICAL CAMERA
3
MONITOR
4
ACCESS
5
TIME & DATE
6
PORT
7
PRIORITY
8
SEQUENCE
9
MACRO
10
ALARM CONTACTS
11
EVENT TIMER
12
SET AUXILIARY
13
SET PASSWORD
14
ABOUT CM6800
ENGLISH
RETURN
00654
SET SERIAL PORT 05
DEVICE:
KBD300
TYPE:
RS485
BAUD RATE:
9600
PARITY:
ODD
DATA BITS:
8
STOP BITS:
1
RETURN
00657
NOTE:
In the programming
screens “KBD300” is used
to refer to the KBD100,
KBD200, and KBD300
keyboards.
to refer to the KBD100,
KBD200, and KBD300
keyboards.
PORTS (SERIAL/COM PORTS)
Use the Port screen to configure the settings for each device connected to a Serial/COM
port on the rear panel of the CM6800.
port on the rear panel of the CM6800.
Por
t
Pr
ogramming
ogramming