Справочник Пользователя для D-Link DFE-916X
Making Connections
24
A crossover cable is a straight-through twisted-pair cable in which the
wires have been crossed. The figure below shows the pin assignments for
an Ethernet or Fast Ethernet crossover cable:
wires have been crossed. The figure below shows the pin assignments for
an Ethernet or Fast Ethernet crossover cable:
NOTE:
The first twisted-pair port (Port 1) is shared
with the Uplink port. If you connect a hub to
the Uplink port, then do not use Port 1.
with the Uplink port. If you connect a hub to
the Uplink port, then do not use Port 1.
Optional Module Connections
There are three optional modules that may be added to any of the DFE-916
series hubs. Each hub can accommodate one module. Each of the modules
offers a different additional network interface that allows for greater flexi-
bility in how these hubs may be used in a network.
series hubs. Each hub can accommodate one module. Each of the modules
offers a different additional network interface that allows for greater flexi-
bility in how these hubs may be used in a network.
The sections that follow provide a brief overview of the module and basic
instructions on various settings and indicators.
instructions on various settings and indicators.
Module Installation
The installation procedure for each module is the same. Additional infor-
mation about each module is provided below.
mation about each module is provided below.
To install any of the modules: