Справочник Пользователя для DELL 9.8(0.0)
secondary
interface
interface
Enter the keyword secondary to configure the secondary
interface then one of the following interfaces and slot/port
information:
interface then one of the following interfaces and slot/port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
control-vlan
vlan-id
vlan-id
Enter the keyword control-vlan then the VLAN ID. The
range is from 1 to 4094.
range is from 1 to 4094.
Defaults
none
Command
Modes
Modes
CONFIGURATION (conf-frrp)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on the C-Series.
7.4.1.0
Introduced.
Usage
Information
Information
This command causes the Ring Manager to take ownership of the two ports after
IFM validates the configuration. Ownership is relinquished for a port only when the
interface does not play a part in any control VLAN, that is, the interface does not
belong to any ring.
IFM validates the configuration. Ownership is relinquished for a port only when the
interface does not play a part in any control VLAN, that is, the interface does not
belong to any ring.
Related
Commands
Commands
— displays the Resilient Ring Protocol configuration information.
724
Force10 Resilient Ring Protocol (FRRP)