Справочник Пользователя для Raritan Computer DKX2-v2.6.0-0R-E
Chapter 8: Device Management
168
Note: If you have Read-Write privileges to the MIB file, use a MIB editor
to make changes to the file.
to make changes to the file.
SysLog Configuration
To configure the Syslog (enable Syslog forwarding):
1. Select Enable Syslog Forwarding to log the device's messages to a
remote Syslog server.
2. Type the IP Address/Hostname of your Syslog server in the IP
Address field.
3. Click OK.
Note: IPv6 addresses cannot exceed 80 characters in length for the host
name.
name.
Use the reset to defaults feature to remove the syslog configuration.