Справочник Пользователя для Q-Logic 59021-05

3 – Planning

Fabric Management

3-10

59021-05 A

Virtual Private Fabric (VPF) zoning divides the fabric for purposes of controlling 
discovery and both inbound and outbound traffic. This type of zoning is useful for 
providing security and reserving paths between devices to guarantee bandwidth. 
VPF zoning is a type of hard zoning that is hardware enforced. Members can only 
transmit to and receive from members of the same VPF zone. The VPF zone 
boundary is secure against both inbound and outbound traffic. The following rules 
apply to VPF zones:

■

VPF zones that include members from multiple switches must include the 
ports of the inter-switch links.

■

VPF zones cannot overlap; that is, a port can be a member of only one VPF 
zone.

■

VPF zone boundaries supersede both soft and ACL zone boundaries.

■

Membership can be defined only by domain ID and port ID.

■

VPF zoning supports all port modes.

The SANbox Manager application and CLI execute on a management workstation 
that provides for the configuration, control, maintenance of the fabric. Supported 
platforms include Windows, Windows NT, Solaris, and Linux. The SANbox 
Manager application can manage multiple fabrics. Consider how many fabrics will 
be managed, how many management workstations are needed, and whether the 
fabrics will be managed with the CLI or SANbox Manager.

The switch supports a combined maximum of 15 logins. This includes SANbox 
Manager inband and out-of-band logins, Application Programming Interface (API) 
inband and out-of-band logins and Telnet logins. Of this 15, there can be a 
combined maximum of 10 SANbox Manager and API logins. Additional logins will 
be refused.