Справочник Пользователя для Q-Logic 59021-05

B – Command Line Interface

Fallback Command

B-10

59021-05 A

Fallback Command

Loads the fallback version of the firmware from switch memory. The switch stores
two versions of the firmware. This command alternately activates the two
versions.

Authority

Admin

Syntax

fallback

Notes

■

The Show Switch command displays the available firmware versions and
the currently active version.

■

After executing the Fallback command, reset the switch for the firmware to
be placed in effect.

Examples

The following is an example of the Fallback command:

SANbox2 #> admin start

SANbox2 (admin) #> fallback

Reverting to previous software image. Please confirm (y/n): [n] y

SANbox2 #> admin end