Справочник Пользователя для Q-Logic 8C/16

4 – Managing Switches

Configuring a Switch

59022-06 A

4-23

Q

The SNMP configuration defines how authentication traps are managed.

 describes the SNMP configuration parameters.

SNMP Proxy

SNMP proxy. Enables or disables SNMP communication with other 
switches in the fabric.

Contact

Specifies the name (up to 32 characters) of the person who is to be 
contacted to respond to trap events. The default is “undefined”.

Read 
Community

Read community password (up to 32 characters) that authorizes an 
SNMP agent to read information from the switch. This is a write-only 
field. The value on the switch and the SNMP management server 
must be the same. The default is “public”.

Trap Community Trap community password (up to 32 characters) that authorizes an 

SNMP agent to receive traps. This is a write-only field. The value on 
the switch and the SNMP management server must be the same. 
The default is “public”.

Location

Specifies the name (up to 32 characters) for the switch location. The 
default is “undefined”.

Authentication 
Trap

Enables or disables the reporting of SNMP authentication failures. If 
enabled, a notification trap is sent when incorrect community string 
values are used. The default value is False.

Write 
Community

Write community password (up to 32 characters) that authorizes an 
SNMP agent to write information to the switch. This is a write-only 
field. The value on the switch and the SNMP management server 
must be the same. The default is “private”.