Справочник Пользователя для Netgear M4100-50G-POE+

Use this command to remove all users from the IAS database.

clear aaa ias-users

Use this command to display configured IAS users and their attributes. Passwords 
configured are not shown in the show command output.

show aaa ias-users

SNMP Commands

This section describes the commands you use to configure Simple Network Management 
Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so 
that it can communicate with SNMP managers on your network. 

Use this command to set the name and the physical location of the switch and the 
organization responsible for the network. The range for <name>, <loc> and <con> is from 1 
to 31 alphanumeric characters. 

snmp-server {sysname <name> | location <loc> | contact <con>}

Use this command to add (and name) a new SNMP community. A community <name> is a 
name associated with the switch and with a set of SNMP managers that manage it with a 
specified privileged level. The length of <name> can be up to 16 case-sensitive characters.

Community names in the SNMP Community Table must be unique. 

When making multiple entries using the same community name, the 
first entry is kept and processed and all duplicate entries are 
ignored. 

Privileged EXEC

Privileged EXEC

none

Global Config