Листовка для Netgear 7200

©2005 by NETGEAR, Inc. All rights reserved.
NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders. Information 

is subject to change without notice.

1. Enter privilege mode by typing enable at the console prompt.
2. The system will ask for the password.
3. Press the Enter key without providing a password.

The system will display a modified prompt:

(GSM7224) #

4. Enter the following commands:

(GSM7324) #network protocol none

5. The system will respond like this:

Changing the protocol mode will reset the ip configuration.

Are you sure you want to continue? (y/n)

6. Enter Y.
7. After the system prompt returns, enter the following command:

(GSM7324) #network parms 192.168.1.100 255.255.255.0 192.168.1.1

The example above uses 192.168.1.100 for the IP address and 192.168.1.1 for the 
gateway IP address. You should substitute your own IP addresses in the command 
line above.

1. Log in to the firewall by entering IP address the unit into a Web browser.

.

A login window like the one shown below opens:

2. Click the Login link.

A user name and password dialog box opens like this one.

3. Type the default user name of admin and default of no password, or whatever 

password you have set up.
Once you have logged in, your Web browser should automatically find the switch and 
display the home page. Use the home page to configure the switch. Consult the full 
manual for your switch on the Resource CD for full configuration and command line 
options.

Thank you for selecting NETGEAR products. Please register online and take advantage of 
the technical support resources such as our online knowledge base. Point your browser to 
http://www.NETGEAR.com/support/ and choose the product you are interested in to 
browse for support information. 

To register, point your browser to this location:
http://www.NETGEAR.com/register