Справочник Пользователя для 3com 3CRWXR10095A

7 Click OK to save the changes and close the box.

8 Do one of the following:

„

To use the RF interactive measurement mode, see “Using RF 
Interactive Measurement Mode”.

„

To generate network design information, see “Generating RF 
Network Design Information” on page 155.

„

Click Finish to save the changes and close the wizard. 

RF interactive measurement mode is useful when you are troubleshooting 
or surveying the coverage areas on the floor. You can quickly measure 
signal strengths for any location on the floor.

1 Click the 

 icon in the toolbar. 

2 Click any location on the floor. Received signal strength indication (RSSI) 

measurements for the selected location appear next to the Floor View. 
See “Reading the RF Measurement Table” for information about the 
fields in the display.

The projected signal strengths for the planned equipment from that 
measurement point are shown in the RF measurement table. 

X-Y coordinates for the measurement point and display options are also 
available to customize the RSSI table. Using this interactive mode can be 
valuable when verifying deployment coverage with a portable WLAN 
measurement tool on the floor.