Справочник Пользователя для 3com 3CRWXR10095A
262
C
HAPTER
7: C
ONFIGURING
W
IRELESS
P
ARAMETERS
Do not change the deny rule at the bottom of the ACL. This rule must be
present and the capture option must be used with the rule. If the rule
does not have the capture option, the Web Portal user never receives a
login page.
present and the capture option must be used with the rule. If the rule
does not have the capture option, the Web Portal user never receives a
login page.
11 To modify access rules, click Next and go to “Modifying Access Rules”.
Otherwise, click Finish.
Modifying Access Rules
1 If you have not already done so, access the Access Rules Configuration
page for the service profile:
a Select the service profile in the Wireless Service Profiles table.
b Select one of the following in the Task List panel:
802.1X Access
MAC Access (used for voice)
Web Portal Access
Open Access
Access Rules
c If you selected Access Rules, go to step 2. Otherwise, click Next to
advance through the wizard until you reach the Access Rules
Configuration page.
Configuration page.
2 To create a new rule, click Create.
Specify the user glob or MAC address glob. (For syntax information,
see “Access Rules” on page 238.)
see “Access Rules” on page 238.)
To modify an existing rule, select the rule and click Properties.
(For information, see the procedure for configuring the type of service
profile you are modifying. For example, if you selected an 802.1X profile,
see “Configuring an 802.1X Wireless Service” on page 242.)
profile you are modifying. For example, if you selected an 802.1X profile,
see “Configuring an 802.1X Wireless Service” on page 242.)
3 When you finish making changes, click Finish to save them and close the
wizard.